KX Audio are a young passionate company combining the disciplines of acoustic design, electronic design and audio engineering to bring you the ultimate solutions in active loudspeaker systems.
KX30
The KX30 is a high powered three way full range active speaker system. The 6.5" horn loaded midrange provides exceptional vocal reproduction working alongside a powerful 15" woofer in an increased volume enclosure to deliver low frequencies with extreme definition, authority and weight. On board electronics ensure fast, easy set up and complete control with phase alignment, equalization and speaker protection integrated into the KX30s amplifier module.
Applications
- Portable P.A. for Solo Artists, Duos and Live Bands
- High Quality DJ, Karaoke and A.V playback
- High Powered full range or Mid High when used with KX Active subwoofers
- Budget Installed sound
Features
- Professional, 18mm Plywood construction with heavy duty protective coating.
- Durable Rubber top and bottom end caps for increased protection.
- 132dB Output with high dynamic range and low noise floor.
- 1000W of total power with complete on-board speaker management system.
- 850W high efficiency, current enhancing, switching low frequency amplifier.
- 15” high efficiency woofer for improved low frequency reproduction and increased output.
- High Power Bandwidth 100W Mid frequency amplifier
- 6.5” horn loaded mid range speaker for improved vocal reproduction and increased output
- High Power Bandwidth 50W high frequency amplifier
- Advanced Technology Titanium diaphragm compression driver, 1.0” exit with exceptionally low distortion and extended frequency response.
- Wide dispersion, 90” H x 40” V rotatable horn.
- Two recessed, centre balanced side handles for simplified handling and carrying.
- Three recessed M10 suspension points for flexible rigging and installation options.
- Top hat for pole mounting applications.
- Low frequency Low pass output for correct set up and equalisation when adding a KX series active subwoofer.
- 2 Dual colour LED indicators for signal present, limiter, thermal condition and power ON status.
Product
KX30
System Acoustic Performance
-3dB Response
48Hz - 18kHz
-10dB Response
42Hz – 24kHz
Max SPL
132dB
Crossover Point
500Hz - 3kHz
Horizontal / Vertical
90° x 40° Rotatable
High Frequency Section
Throat Exit Diameter
1" (25.4mm)
Diaphragm Material
Titanium
Magnet Type
Ferrite
Diaphragm Size
1.5" (38.1mm)
Mid Frequency Section
Mid Range Cone Size
6.5" (165.1mm)
Magnet Type
Neodymium
Horn with constant Directivity
90° x 40° Rotatable
Voice Coil Diameter
1.5" (38.1mm)
Low Frequency Section
Acoustic Design
Front Loaded, Bass Reflex
Woofer Size
15" (381mm)
Voice Coil Diameter
3" (76.2mm)
Diaphragm Material
Epoxy Reinforced Cellulose
Magnet Type
Ferrite
Design
Inside-outside
Signal Input
Input Sensitivity
0.75V rms
Input Impedance
20kΩ
Power Connector
Power Connector
IEC 320
High Frequency Amplifier
Type
High Power Bandwidth
Rated Continuous Power
50W
Distortion
<0.05%
Operating Bandwidth
3.0kHz - 24kHz
Mid Frequency Amplifier
Type
High Power Bandwidth
Rated Continuous Power
100W
Distortion
<0.05%
Operating Bandwidth
500Hz -3kHz
Physical Dimensions
Height
1152mm (45.35")
Width
468mm (18.43")
Depth
379mm (14.92")
Weight
41kg (90.4lbs)
Bass Amplifier Specification
Type
High Efficiency Switching
Rated Continuous Power
850W
Distortion
<0.05%
Operating Bandwidth
42Hz -500Hz
Recommended Amperage
Recommended Amperage
10A 115V | 5A 230V
Operating Voltage
Operating Voltage
100 -120V @ 60Hz | 230 -250V @ 50Hz